Request a Quote

For Immediate Release
April 1, 2019

Contact: Mike Gresser
Gresser Companies
612.518.5380
info@primxcompositena.com

Gresser Companies and its licensing partners awarded more than two million square feet (185,806 square meters) of PrīmXComposite jointless industrial floors in North America

SHAKOPEE, Minn.—Gresser Companies, Inc.
announces that the company and its licensing partners have been awarded more than 2 million square feet (sq. ft.) or 185,806 square meters (sq. m) of the patented PrīmXComposite™ jointless industrial floor system in the United States and Canada in the past year.

Projects include the 400,000-sq. ft. (37,161-sq. m) Arauco facility in Grayling, Mich., and the 168,000-sq. ft. (15,608-sq. m) Magna Corporation building in Grand Blanc, Mich. Both were awarded to licensing partner Fessler & Bowman.

Lewis Concrete, licensing partner in Wisconsin, has completed a 90,000-sq. ft. (8,361-sq. m) distribution center for World Food Processing in Turtle Lake, Wis.  They have also been awarded the 207,000-sq. ft. (19,230 sq. m) Cardinal Glass Facility and the 140,000-sq. ft. (13,006 sq. m) Advanced Food Products facility in West Clear Lake, Wis.

In Toronto, Ontario, licensing partner Belmont Concrete has been awarded a 210,000-sq. ft. (19,510 sq. m) cold storage facility. Licensing partner Prime Industrial Floors of Lakeland, Fla., recently completed a 215,000-sq. ft. (19,974-sq. m) logistics center in Tampa, Fla.

In addition to the new construction by licensing partners, Gresser Companies provided PrīmXComposite for the 120,000-sq. ft. (11,148-sq. m) Vickerman Distribution Center in Norwood-Young America, Minn., for Greystone Construction and recently completed the 250,000- sq. ft. (22,225-sq. m) Vomela project in St. Paul, Minn., for RJ Ryan. Work has just begun in Becker Minn., as well, with 107,000 sq. ft. (9,940-sq. m) for Northern Metals and another 155,000 sq. ft. (14,400-sq. m) at Lakeview Industries in Carver Minn., scheduled to begin in May.

PrīmXComposite, the world’s first joint-free floor system, is an internationally patented composite technology that solves shortcomings of traditional concrete. Such concrete is saw-cut into 12- to 18-ft. (3.66- to 5.49-m) square panels to control the miles of cracking that develop. These saw cuts deteriorate over time and the concrete shrinks and deforms, creating uneven surfaces, wearing out materials handling equipment, reducing efficiency and increasing maintenance costs. More than one acre of PrīmXComposite is placed per day with no saw cuts, no shrinkage, no deformation and virtually no cracking.

“It’s a truly disruptive technology,” says Mike Gresser, CEO of Gresser Companies. “Forward thinkers see the obvious advantages immediately. It is by far the most advanced concrete floor system ever developed. The implication for industrial floors, pavements and other reinforced concrete applications is astounding.”

To learn more about PrīmXComposite jointless concrete floor or to find a licensing partner in your area, visit www.primxcompositena.com, email info@primxcompositena.com or call 1-888-85-PRIMX (7-7469). For information on becoming a licensing partner, visit www.primxcompositena.com/licensee/ or call 1-888-85-PRIMX (7-7469).

Developed in Riga, Latvia, by Primekss SIA, the PrīmXComposite technology combines steel fiber reinforcement—rather than rebar—with next-generation shrinkage-compensating additives. The result is a thinner floor with a higher load capacity and zero saw cuts. The technology not only increases efficiency and reduces equipment and facility maintenance, it also reduces CO2 emissions by thousands of tons on a typical project. It’s thinner, flatter, stronger and less expensive than traditional reinforced concrete. PrīmXComposite floors are in service in more than 20 countries worldwide, with over 160,000,000 square feet (1,4864,486 square meters) of floor, outdoor pavement and other structural projects completed.

About Fessler & Bowman, Inc.
Fessler & Bowman, Inc. was founded in Michigan in 1963 by Donald Fessler & George Bowman and was started as a residential basement wall & flatwork contractor. Today, Fessler & Bowman, Inc., is recognized across the country as a full-service concrete, civil and utility contractor with three offices to serve its clients. Our corporate office is located in Flushing, Mich., and our regional offices are located in Charlotte, N.C. and Bossier City, La. Our company has always been widely known for its quality and its approach to using the latest technology. In 2018, we added to our technology arsenal by becoming a PrimXComposite licensee in Michigan, Ohio, North Carolina, South Carolina and Tennessee. To date, we have placed 568,000 square feet of the PrimXComposite floor system and currently have two other projects to complete using the PrimXComposite floor system.
www.fesslerandbowman.com

About Lewis Construction, Inc.
Lewis Construction, founded in 1968, is a Wisconsin-based concrete placement construction company led by Steve Lewis. Steve leads “The Lew Crew” on concrete projects including PrīmXComposite, floors, curb and gutter, and foundations. Committed to strong Midwestern values, the team values a good day’s work, the safety of the crew, and accountability at every level of the organization. Lewis’ mission is to meet or exceed customers’ needs by providing quality concrete construction on time and safely.
www.lewisconstruction.net

About Belmont Concrete Finishing
Dedicated to quality workmanship and service excellence, Belmont Concrete Finishing has been constructing concrete floors for 50 years. The company, based outside Toronto, Ontario, has developed a reputation in the industry for maintaining the highest standards of construction proficiency and business ethics. Utilizing state-of-the-art equipment and machinery, Belmont Concrete Finishing consistently delivers superior project results that meet or exceed contractor expectations. www.belmontconcrete.com

About Gresser Companies
Gresser Companies, Inc. is headquartered in Shakopee, Minn., and is celebrating its 50th year of business as a leader in concrete and masonry construction in the Twin Cities of Minneapolis and St. Paul. The company was the first North American licensee of PrīmXComposite technology in 2014 and has since partnered with the PrīmXComposite’s inventors to license the technology throughout North America. By the end of 2018, Gresser placed more than two million square feet (185,806 square meters) of PrīmXComposite in the Twin Cities market.
www.gresserco.com